Grid tie micro inverter 600w home solar inverter dc 10.8-28v to ac 110v/120v/230v/240v power inverter

New

$71.10

/ $79.00

In stock


grid tie micro inverter 600w home solar inverter dc 10.8-28v to ac 110v/120v/230v/240v power inverter
Specification:
600w grid tie solar power Inverter
Grid-inverter Type
600W
Recommended Maximum PV Power
Ppv=720Wp
DC Maximum Input Power
PDC.max=700W
DC Maximum Voltage
VpvDC30.2VDC
PV MPPT DC Voltage Range
Vpv 10.5V~28VDC
Peak Inverter Efficiency
max>94%
MPPT Efficiency
99%
PV Maximum Input Current
Ipv.max40A
AC Rating Output Power
600W AC
AC Maximum Output Power
600W AC
Reverse Polarity Protection
Fuse
AC Normal Voltage Range
90V-140/180~260VAC
AC Frequency
45Hz~53Hz/55Hz~63Hz
Inverter Output Current Total Harmonic Distortion
THDIAC
Phaseshift
Island Effect Protection
VAC;f AC
Inverter Output Shorting Protection
Current Limiting
Disaplay
LED
Standby Power Consumption
Nighttime Power Consumption
Ambient Temperature Range
-250C~600C
Ambient Humidity
0~99%(Indoor Type Design)
Waterproof
Indoor Type Design
Eelectromagnetic Compatibility
EN50081.part1 EN50082.part1
Power Network Disturbance
EN61000-3-2
Power Network Detection
DIN VDE 126
Details:
User Manual:
System Function
directly connected to the solar panels (do not need to connect the battery)
Using precise MPPT function, APL functions, the inverter automatically adjust the solar panels of maximum output power,simply connect the solar panel to the grid inverters. Do not need to connect the battery.
AC 0 angle with high precision auto-detection
AC phase angle of 0 through isolation amplifier then input to the MCU for high-precision detection and analysis. The phase shift rate is less than 1%, thus achieve high-precision with phase modulation AC output together.
Synchronous High-frequency Modulation
In the process of the grid, usually adapt the same phase angle in parallel. (ie, When the two-phase alternating current total is equal to 0.Use switch to combination the two AC fusion) and the product is rectified AC half-frequency AC to 100Hz first, then the machine use the high frequency current in the circuit and semi-100Hz frequency alternating current generated combination, to achieve high-frequency modulation.
Pure Sine Wave Output
Use SPWM directly to make pure sine wave output.
Automatic Sensing Function Solar Luminosity
Use the latest luminosity perception operation technology. The different illuminate angle and intensity of the solar panel will produce different current output. Use advanced CPU to operate the different illuminance and the data can be directly displayed on the LCD. Then you can visually see the sense of the strength of the sun unit. Used more convenient.
Power Automatically Locked (APL)
In different current fluctuations, we should use the MPPT function. When the MPPT function adjusted to the maximum power point, the product automatically powers locked in maximum power point, then made the output power more stable.
Maximum Power Point Tracking (MPPT)
Because the current intensity and the voltage changes at any time, if there is no power point tracking, there will be a lot of problems. In the past time, usually adopt a solar controller, but this product uses high-precision MPPT operation power, automatic and immediate adjust the solar panels output power at the maximum output point, then achieve a stable output purposes.
Automatically Adapt To Different Load Power Factor
Adapt to any of the power load.
Constant Current, Constant Power
This product is constant current, constant output power, without any overload, over-current phenomenon.
Automatically Shut Down When The Power Output Of a Fault
When the city power system is in failure, the inverter will automatically turn off the output.
Current Limit Protection
Current limit
Stack Multiple Machines
Multiple small power inverters in parallel can achieve large output power.
High-Frequency High Conversion Rate
Adapt high frequency converter, the output more efficient.
User Guide
1. Installation Connection
1. Red terminal: Connect DC positive, black terminal: Connect DC negative. Show in Figure 1.
Figure 1
2. AC socket: Connect to the mains. Put the side of the AC cord which has holes into the inverter with 3 foot outlet and the other side of the AC cord to home 3PIN AC outlet. Show in Figure 2.
Figure 2
3. Switch: Connect the connections in right way, then turn on the switch. The inverter starts to work.
3. Stack using
In order to achieve higher power use requirements, this product can be stacked, such as: 4 grid inverter1000W stacking can achieve 4000W.And the number of the stacking is unlimited. Used as shown in Figure 6:
Figure 6
4 . Input and output
1 . DC input limit
Input voltage range: 10.5V to 28V
Solar Panel: Recommend using the power more than 30W and the standard voltage of 17.5V PV panels.
Recommend using multiple solar panels. Solar panel in series will result in high-input voltage which will exceed the working voltage range of the inverter.
Wind turbine system: Rated voltage 24VDC, maximum voltage 28VDC.
Voltage range of the inverter whose output is 220V AC.: 170V - 260V
Voltage range of the inverter whose output is 110V AC.: 90V - 160V
2.AC output:
Voltage range of the inverter whose output is 220V AC.: 170V - 260V
Voltage range of the inverter whose output is 110V AC.: 90V - 160V
5.LED Indicator:
1.Red LED:
1.Low-voltage protection (input DC voltage is less than 10.5VDC).
2.Over-voltage protection (Input DC voltage is greater than 28.5VDC).
3.Over-temperature protection (when the chassis temperature is above 75 c ,
the temperature dropped about 2-10 minutes to restart automatically after cooling).
4.Fault Protection (when 110VAC or 220VAC power outage or shutdown).

Tags: inverter component, inverter circuit, inverter with solar charger, Cheap inverter component, High Quality inverter circuit, China inverter with solar charger Suppliers

Unit Type piece
Package Weight 2.0kg (4.41lb.)
Package Size 35cm x 26cm x 12cm (13.78in x 10.24in x 4.72in)
Output Type Single
is_customized Yes
Type DC/AC Inverters
Size 21*16.5*5.3cm
Input Voltage Vpv 10.5V~28VDC
Output Current 0-5.4A
Output Voltage 90V-140/180-260VAC
Output Frequency 55Hz-63Hz/ 45Hz-53Hz
Weight 1.3kg
Model Number TEG-600W
Output Power 0-600W
DC maximum voltage VpvDC 30.2VDC
Anti-voltage protection Fuse
Islanding protection VAC;f AC
Place of Origin Shanghai, China (Mainland)

Write a review

Grid tie micro inverter 600w home solar inverter dc 10.8-28v to ac 110v/120v/230v/240v power inverter

Grid tie micro inverter 600w home solar inverter dc 10.8-28v to ac 110v/120v/230v/240v power inverter

grid tie micro inverter 600w home solar inverter dc 10.8-28v to ac 110v/120v/230v/240v power inverter Specification: 600w grid tie solar power Inverter Grid-inverter Type 600W Recommended Maximum PV Power Ppv=720Wp DC Maximum Input Power PDC.max=700W DC Maximum Voltage VpvDC30.2VDC PV

Related products